Investigation of inner-basin variation: Impact of large reservoirs on water regimes of downstream water bodies     

Xue Dai  Zhongbo Yu  Guishan Yang  Chong-Yu Xu  Rongrong Wan 《水文研究》2021,35(5):e14241

Large dams and reservoirs alter not only the natural flow regimes of streams and rivers but also their flooding cycles and flood magnitudes. Although the effect of dams and reservoirs has been reported for some vulnerable locations, the understanding of the inner-basin variation with respect to the effects remains limited. In this study, we analyse the Three Gorges Dam (TGD) built on the Changjiang mainstream (Yangtze River) to investigate the dam effect variations in the system of interconnected water bodies located downstream. We investigated the effect of flow alterations along the downstream river network using discharge time series at different gauging stations. The river–lake interactions (referring to the interactions between the Changjiang mainstream and its tributary lakes i.e. the Dongting and Poyang lakes) and their roles in modifying the TGD effect intensity were also investigated in the large-scale river–lake system. The results show that the water storage of the tributary lakes decreased after the activation of the TGD. Severe droughts occurred in the lakes, weakening their ability to recharge the Changjiang mainstream. As a consequence, the effect of the TGD on the Changjiang flow increase during the dry season diminished quickly downstream of the dam, whereas its impact on the flow decrease during the wet season gradually exacerbated along the mainstream, especially at sites located downstream of the lake outlets. Therefore, when assessing dam-induced hydrological changes, special attention should be paid to the changes in the storage of tributary lakes and the associated effects in the mainstream. This is of high importance for managing the water resource trade-offs between different water bodies in dam-affected riverine systems.  相似文献   

基于主体功能区约束的大气污染物总量控制目标分配研究   总被引：1，自引：0，他引：1  

蒋洪强  张静  卢亚灵  刘年磊 《地域研究与开发》2015,(3)

考虑经济发展水平、污染物排放现状、污染物治理水平、空气质量,特别是国家主体功能区环境目标约束等因素,构建大气污染物排放总量分配的指标体系,用改进的等比例分配方法对2015年国家SO2,NOx总量控制目标进行区域分配。分配结果表明:SO2和NOx削减量大的省份主要集中在华北平原及其周围地区,这些地区污染物排放量大、空气质量较差;削减比例较大的地区主要集中在西部地区以及北京、天津2个直辖市,这些地区单位GDP能耗高、工业污染物去除率低、空气质量差;削减量相对较小的地区主要集中在西南和南部一些省份;削减比例较小的地区主要集中在中南部和南部几个省份,这些地区污染物排放量相对较少,空气质量好于其他省份。  相似文献   

Hydrological variations on the Central Tibetan Plateau since the Last Glacial Maximum and their teleconnection to inter‐regional and hemispheric climate variations          下载免费PDF全文

THOMAS KASPER  TORSTEN HABERZETTL  JUNBO WANG  GERHARD DAUT  STEFAN DOBERSCHÜtz  LIPING ZHU  ROLAND MÄUSBACHER 《第四纪科学杂志》2015,30(1):70-78

  相似文献   

Including spatial distribution in a data‐driven rainfall‐runoff model to improve reservoir inflow forecasting in Taiwan          下载免费PDF全文

Meng‐Jung Tsai  Robert J. Abrahart  Nick J. Mount  Fi‐John Chang 《水文研究》2014,28(3):1055-1070

Multi‐step ahead inflow forecasting has a critical role to play in reservoir operation and management in Taiwan during typhoons as statutory legislation requires a minimum of 3‐h warning to be issued before any reservoir releases are made. However, the complex spatial and temporal heterogeneity of typhoon rainfall, coupled with a remote and mountainous physiographic context, makes the development of real‐time rainfall‐runoff models that can accurately predict reservoir inflow several hours ahead of time challenging. Consequently, there is an urgent, operational requirement for models that can enhance reservoir inflow prediction at forecast horizons of more than 3 h. In this paper, we develop a novel semi‐distributed, data‐driven, rainfall‐runoff model for the Shihmen catchment, north Taiwan. A suite of Adaptive Network‐based Fuzzy Inference System solutions is created using various combinations of autoregressive, spatially lumped radar and point‐based rain gauge predictors. Different levels of spatially aggregated radar‐derived rainfall data are used to generate 4, 8 and 12 sub‐catchment input drivers. In general, the semi‐distributed radar rainfall models outperform their less complex counterparts in predictions of reservoir inflow at lead times greater than 3 h. Performance is found to be optimal when spatial aggregation is restricted to four sub‐catchments, with up to 30% improvements in the performance over lumped and point‐based models being evident at 5‐h lead times. The potential benefits of applying semi‐distributed, data‐driven models in reservoir inflow modelling specifically, and hydrological modelling more generally, are thus demonstrated. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Numerical modeling of three‐phase dissolution of underground cavities using a diffuse interface model     

H. Luo  F. Laouafa  J. Guo  M. Quintard 《国际地质力学数值与分析法杂志》2014,38(15):1600-1616

Natural evaporite dissolution in the subsurface can lead to cavities having critical dimensions in the sense of mechanical stability. Geomechanical effects may be significant for people and infrastructures because the underground dissolution may lead to subsidence or collapse (sinkholes). The knowledge of the cavity evolution in space and time is thus crucial in many cases. In this paper, we describe the use of a local nonequilibrium diffuse interface model for solving dissolution problems involving multimoving interfaces within three phases, that is, solid–liquid–gas as found in superficial aquifers and karsts. This paper generalizes developments achieved in the fluid–solid case, that is, the saturated case [1]. On one hand, a local nonequilibrium dissolution porous medium theory allows to describe the solid–liquid interface as a diffuse layer characterized by the evolution of a phase indicator (e.g., porosity). On the other hand, the liquid–gas interface evolution is computed using a classical porous medium two‐phase flow model involving a phase saturation, that is, generalized Darcy's laws. Such a diffuse interface model formulation is suitable for the implementation of a finite element or finite volume numerical model on a fixed grid without an explicit treatment of the interface movement. A numerical model has been implemented using a finite volume formulation with adaptive meshing (e.g., adaptive mesh refinement), which improves significantly the computational efficiency and accuracy because fine gridding may be attached to the dissolution front. Finally, some examples of three‐phase dissolution problems including density effects are also provided to illustrate the interest of the proposed theoretical and numerical framework. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Use of a watershed hydrologic model to estimate interbasin groundwater flow in a Costa Rican rainforest          下载免费PDF全文

Carlo Zanon  David P. Genereux  Steven F. Oberbauer 《水文研究》2014,28(10):3670-3680

The watershed hydrologic model TOPMODEL was used to estimate interbasin groundwater flow (IGF) into a small lowland rainforest watershed in Costa Rica. IGF is a common hydrological process but often difficult to quantify. Four‐year simulations (2006–2009) using three different model approaches gave estimates of IGF that were very similar to each other (10.1, 10.2, and 9.8 m/year) and to an earlier estimate (10.0 m/year) based on 1998–2002 data from a budget study that did not use a hydrologic simulation model, providing confidence in the new estimates and suggesting each of the three model approaches is viable. Results show no significant temporal variation in IGF during 2006–2009 (or between this period and the earlier study from 1998–2002). Simulations of the 16 consecutive 3‐month periods in 2006–2009 gave 16 values of IGF rate with a mean (10.1 m/year, standard deviation = 0.6 m/year) very similar to the estimates above from the 4‐year simulations. This suggests the modified version of TOPMODEL can be used to model stream discharge and estimate IGF for sub‐annual time periods during which change in water storage is not necessarily equal to zero. Thus, simple watershed models may be used to estimate IGF based on even relatively short calibration periods, making such models useful tools in the study of this widespread hydrological process that affects water and chemical fluxes and budgets but is often difficult and costly to quantify. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Hydrodynamic Performance of the Arc-Shaped Bottom-Mounted Breakwater     

楚玉川  程建生  王景全  李志刚  江克斌 《中国海洋工程》2014,(6):749-760

The problem of the hydrodynamic interaction with the arc-shaped bottom-mounted breakwaters is investigated theoretically. The breakwater is assumed to be rigid, thin, impermeable and vertically located in a finite water depth. The fluid domain is divided into two sub-regions of inner and outer by an auxiliary circular interface. Linear theory is assumed and the eigenfunction expansion approach is used to determine the wave field. In order to examine the validity of the theoretical model, the analytical solutions are compared to agree well with published results with the same parameters. Numerical results including wave amplitude, surge pressure, and wave force are presented with different model parameters. The major factors including wave parameters, structure configuration, and water depth that affect the surge pressure, wave forces, and wave amplitudes are discussed and illustrated by some graphs and cloud maps.  相似文献   

Application of a Bayesian model to infer the contribution of coalbed natural gas produced water to the Powder River,Wyoming and Montana          下载免费PDF全文

Jason M. Mailloux  Kiona Ogle  Carol D. Frost 《水文研究》2014,28(4):2361-2381

The Powder River Basin (PRB) of Wyoming and Montana contains significant coal and coal bed natural gas (CBNG) resources. CBNG extraction requires the production of large volumes of water, much of which is discharged into existing drainages. Compared to surface waters, the CBNG produced water is high in sodium relative to calcium and magnesium, elevating the sodium adsorption ratio (SAR). To mitigate the possible impact this produced water may have on the quality of surface water used for irrigation, the State of Montana passed water anti‐degradation legislation, which could affect CBNG production in Wyoming. In this study, we sought to determine the proportion of CBNG produced water discharged to tributaries that reaches the Powder River by implementing a four end‐member mixing model within a Bayesian statistical framework. The model accounts for the ⁸⁷Sr/⁸⁶Sr, δ¹³C_DIC, [Sr] and [DIC] of CBNG produced water and surface water interacting with the three primary lithologies exposed in the PRB. The model estimates the relative contribution of the end members to the river water, while incorporating uncertainty associated with measurement and process error. Model results confirm that both of the tributaries associated with high CBNG activity are mostly composed of CBNG produced water (70–100%). The model indicates that up to 50% of the Powder River is composed of CBNG produced water downstream from the CBNG tributaries, decreasing with distance by dilution from non‐CBNG impacted tributaries from the point sources to ~10–20% at the Montana border. This amount of CBNG produced water does not significantly affect the SAR or electrical conductivity of the Powder River in Montana. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Spatial patterns and driving mechanisms of mid‐Holocene hydroclimate in western North America          下载免费PDF全文

Nicholas Wayne Hermann  Jessica Leigh Oster  Daniel Enrique Ibarra 《第四纪科学杂志》2018,33(4):421-434

  相似文献   

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials          下载免费PDF全文

Chao Jiang  Gao‐Feng Zhao 《国际地质力学数值与分析法杂志》2018,42(4):674-693

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.  相似文献